Advidia VP-4 Manuel d'utilisateur télécharger pdf (Page 38)

and trap port (default: 162).

Figure 6.21 SNMP Settings (1)

4. When the SNMPv3 is enabled, you can configure the read username (default: public).

Note: By default settings, the SNMPv1, SNMP v2c and SNMPv3 are disabled.

5. Select the security level to “no auth, no priv”, “auth, no priv”, “no auth, priv” or “auth, priv”.

Figure 6.22 SNMP Settings (2)

6. (1) When the security level is set to “auth, priv”, you can configure the Authentication Algorithm and

Privacy Algorithm parameters.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 61 62

Pas de commentaire

Advidia VP-4 Manuel d'utilisateur Page 38